Tattoo Vector Graphics
 |
No items matching your keywords were found.
How to handle when the flatbed printer is blocked?
If the head of the flatbed printer is blocked, it must be cleaned by the following methods:
A. Cleaning Software
It will automatically clean through the maintenance function driver of the flatbed printer.
B. pumping ink cleaning
When the machine ink printer flat bed are in the position, using the syringe with the tube connected to the ink tube discarded, summaries of 5 ml of ink to any speed. Please do not rebound from the syringe inner tank, in this case will cause the mixture of each nozzle. In the process of pumping of ink, if the sprayer is not sealed protector can move the machine tightly ink gently by hand to ensure the spray nozzle and protector is sealed well. You have to go in cleaning software pumping ink.
C. syringe pump and cleaning
Migrate ink machine, remove the tube ink sac, connect syringe containing cleaning fluid spray tattoo needle, pin and snap pumpback with pressure until the spray can dispenser vertical hairline intact.
D. Cleaning print
Use the spray liquid cleaner to replace the ink that has blocked the mouthpiece, use of graphics software vector to print this color stain, to block clean spray phenomena.
Note:
100% C is the blue ink, 100% M is the red ink, 100% Y is the yellow ink, 100% K is the black ink, 30% C is the light blue color ink, 30% M is the color ink light red, 60% is light black ink, 30% is the lightest black ink.
About the Author
BrotherJet inkjet flatbed printers is working for the solutions of flat-bed inkjet printing and personalized gifts print;
Inkscape tutorial tat 2 svg